How to Setup the Range WiFi Booster in Minutes?

Rangextd WiFi Booster can be installed using two primary methods: WPS Method and Manual Method. RangeXTD installation is not that difficult. Today you will learn how to set up your RangeXTD WiFi booster in minutes. In this comprehensive guide, we will walk you through each step needed to install and configure your RangeXTD WiFi booster to enhance your internet connectivity.

RangeXTD Installation

Learn two main methods to set up RangeXTD WiFi booster at home. Both methods are easy to perform, use either one as per your will.

WPS Method 

1. Position the extender along with the main router.

2. Plug it into the power outlet and turn it on. 

3. Hit the WPS button of the router. 

4. After a few seconds press the WPS button of the extender. 

5. You will see that the LED light on the extender starts blinking.

6. Here you need to wait until this light turns to solid.

7. Relocate the extender to the dead zone area. 

Once it turns solid, the extender is successfully connected to the router. The main thing is, when you use the WPS button, you can use the main routers SSID and password to connect devices.

Manually Setup the Range WiFi Booster

1. Attach your computer or mobile device to the Range WiFi booster. 

(You can use an Ethernet cable or wirelessly connect with the default network)

2. Access any web browser and type IP address 192.168.7.234 into the address bar.

(192.168.7.234 is the default IP address to access the web interface of the extender) 

3. After this, you will reach the login page. 

4. It will ask you to enter a username and password. 

5. Fill in the default username and password in the fields. 

(Default username is admin, and password is password)

6. When login is complete, you will reach the web interface. 

7. Select the WiFi Range Extender option from the given options. 

8. Click on the main router’s network name from the list. 

9. Enter password and click on the Connect or Next button. 

10. Your RangeXTD WiFi booster setup is complete. 

After completing all the steps, move the extender to any place between the router and the dead zone area. Now you can sconnect the Range WiFi booster.

Conclusion 

In the above post, we have elaborated on two easy methods to set up your RangeXTD WiFi booster strategically between your router and the dead zones to maximize network coverage. Both methods are user-friendly and easy to perform. Whether you choose WPS method for its simplicity or the manual setup for more control, you can have your booster operational in just a few minutes.

FAQs

How can I update my RangeXTD WiFi Extender?

To update the RangeXTD WiFi extender, use the steps given below: 

1. Connect the device to the RangeXTD extender. 

2. Access the web interface. 

3. Navigate to the Advanced Settings. 

4. Select Upgrading Firmware. 

5. And download the latest Firmware updates here. 

How to Change SSID and Password of the Extender? 

To change SSID and Password of the RangeXTD, steps are: 

1. Go to the setup interface using IP 192.168.7.234

2. Navigate to the Wireless Settings. 

3. Here set the new SSID and password for the extender. 

How to Change the default login credentials? 

Follow the above given steps to access the web interface. 

1. Go to the Account settings in the web interface. 

2. Locate the option Edit/Change Login username and password. 

3. And change the Login username and password. 

Why can't I connect to my RangeXTD extender?

If you are unable to connect with your RangeXTD extender, then you need to follow some common troubleshooting tips:

1. First, check you are using correct SSID and password to connect to extender.

2. Your device should be within the range of the main router.

3. Restart your extender.

4. Also, check if extender is connected to the main router properly.

5. Reset your extender and configure it again.